Enabling the iLO Shared Network Port feature on HPE ProLiant DL160 Gen9 server

Today We will look at How to Enabling the iLO Shared Network Port feature on HP ProLiant DL160 Gen9 server.

To do that follow steps below:

During the server startup, press F9 in the POST screen:

The System Utilities screen appears:

Select System Configuration and then iLO 4 Configuration Utility.

The iLO 4 Configuration Utility screen appears. Select Network Options, and then press Enter:

Set the Network Interface Adapter field to Shared Network Port – LOM, and then press Enter:

Press F10 to save your changes.

Press [Y] to save:

A message prompt to confirm the iLO settings reset appears. Enter to Continue:

Wait about 30 seconds and  Press Esc until the main menu is displayed.

8. Press Enter to reboot the system:

The IP address of the enabled shared iLO appears on the POST screen on the subsequent boot-up.

You can connect to iLO web interface with that IP address:

That’s all.